ThanaWoods Ez Form
EZ FORM is TEKCOM’s main-stream product line for concrete shuttering,which offers good surface performance and mechanical strength as per EN 13986
(European Standard for wood-based panels for construction uses.)
– Cost-effective solution
– Good concrete surface
– Meet the number of pours as expected
Wood Materials : Legally sourced plantation wood.
Bonding & Formaldehyde Emission (FE) : Class 3 | EN 636:2003 E1 | EN 717-2:1995
Panel Construction : Water Proof bonding with cross-band outer veneer layers. Panel density: 2 630kg/m
Panel Surface & Performance : 130 grams/m2 of black-brown phenolic surface film (PSF) on both sides Alkalinity resistance | AS 6669-2016 Good wear resistance (>300 revolutions on Taber test).
Standard Sizes : 1,220 x 2,440 mm, 1,250 x 2,500 mm, or cut-to-size as buyer’s request.
Size tolerance (width/ length): +/- 1.0 mm per meter.
Squareness tolerance: +/ 1.0 mm per meter length of diagonal.
Pouring Number : EZ FORM is designed for use up to 15 times (2 sides, whole piece).
Suitability for Use and Warranty : Nothing herein constitutes a warranty expressed or implied, including any warranty of merchantability of fitness for use, nor is protection from any law or patent to be inferred. The exclusive remedy for all claims is replacement of materials. Contact the sales office for a copy of the complete TEKCOM Terms and Conditions of Sale.
Other Conformities & Compliances : In case FSC certificate or others are required, contact the sales team for further information.
Warnings : This product will generate wood dust from sawing, sanding, or shaping.
Material safety data sheets are available upon request.
Warnings : Edges of EZ FORM panel are painted black.
Packaging : Panels are packed in crates with metal/ plastic straps, suitable for loading/ unloading by forklifts.
Appropriate Conditions of Storage
Store panels in a dry, clean, well-ventilated, roofed area. Avoid extreme temperature and moisture. Panels must not be placed in contact with the ground. Separate crates from each other with clean, dry and strong spacers of uniform thickness, suitable for loading/unloading by forklifts.
Standard Tools
Panels should be cut, shaped and drilled by using standard wood-working tools. Recommended blade diameter ~ 350 mm, thickness ~ 3.5 mm, number of teeth > 100, and rotational speed 3,000-3,600 rpm.
Edges & Holes Sealing
Seal resulting raw edges, holes, and all damaged areas with appropriate water-resistant/ proof paint.
Avoidance of Falls or Drops
Workers at site need to handle (carry, install, remove, etc.) panels properly and do not drop or let them fall from high levels or directly hit other materials or the ground.
Application of Release Agent
Even though the PSF overlay contains a certain amount of release agent, it is necessary that panels should be coated with suitably approved oil to ensure a cleaner and easier striking, as well as reusage.
Reverse Side Fastening
Panels should be fastened to formwork support components from the reverse side with screws. Shank nails are no recommended.
Cleaning after Use
Formwork plywood panels should be cleaned with water after use to remove concrete residues and other sticking materials on their surface. Suitable care is required to avoid damaging panels.
